The WorkCentre 390 is a small all in one printer that is beneficial in any business office. The size makes it a great commodity in any home, too. The older all in one printers were too inconvenient to have in a home. With the clunky size gone, the WorkCentre 390 can fit on any desk.

The WorkCentre 390 is a laser printer from Xerox. It was designed to replace its brother printer the WorkCentre 385. Besides a printer, it, also, includes a color scanner, fax machine, and copier function. The printer is capable of printing ten pages per minute at 600×600 dpi. It holds up to 150 pieces of paper in the paper tray. The color scanner is capable of 300×300 dpi. The copier can copy up to ten pages per minute, also, and up to 4800 dpi.

With a six second function, the scanner and fax machine on the WorkCentre 390 do a good job, too. The time it takes for the information to transfer from PC to printer may vary, though. The fax has a speed dial function capable of holding up to 80 numbers. The WorkCentre 390, also, has a two megabyte memory and can use a USB interface. The printer can be used when needing to print on different types of documents such as card stocks, envelopes, and labels. The printer is capable of reducing or enlarging a document.

Other features included with the WorkCentre 390 are the three different trays. The trays included are a document input tray, a printer exit tray, and a document exit tray. The cords and wires needed to connect your printer to your PC should be included, too. The cords found should be a 6 foot PC cord, a 6 foot USB cord, an AC power cord, and a telephone cord. Also, found when first opening the printer should be your starter cartridge.

The installation process for the WorkCentre 390 is very simple. It comes with two detailed guides. One covers the installation process while the other goes over the main features on the printer. So, anyone new to this type of printer should have no problem figuring it out.

The Phaser 6100 Cartridge is included with the printer. After you have completed the first stages of installation, then the printer is ready to have the cartridge put in it. Make sure to shake the cartridge from side to side to make sure the toner is evenly dispersed. Then, carefully remove the sealing tape from the cartridge. Grasp the handle of the cartridge and move it down the cartridge slot until it clicks into place. After that, close the lid and you are done.

When looking for more Phaser 6100 Printer Toner Cartridge, you do not have to go much further than your computer. It is found at many printer websites, including Xerox. Sometimes you may be able to find the toner for around $8 but most of the time the only toner found is the Xerox brand which runs about $98. Although it costs more, it covers all parts of the printer, and you will not have to worry about it not working right.

The WorkCentre 390 is an extremely convenient printer to have. With its all in one capabilities any office or home can benefit. The easy installation makes setting up the printer easy and a no brainer. The Xerox Phaser 6100 Toner Cartridge is the only thing besides paper you will have to replace regularly. It is good to know that you can find the toner for this printer at many stores and websites.

Comments are closed.